Action
Send data to an I2C-device.
Syntax
I2CSEND slave, var
I2CSEND slave, var , bytes
Remarks
slave |
The slave address off the I2C-device. |
var |
A byte, integer/word or number that holds the value which will be sent to the I2C-device. |
bytes |
The number of bytes to send. |
This command works only with additional hardware. See appendix D.
See also
Example
x = 5 'assign variable to 5
Dim ax(10) As Byte
slave = &H40 'slave address of a PCF 8574 I/O IC
bytes = 1 'send 1 byte
I2CSEND slave, x 'send the value or
For a = 1 to 10
ax(a) = a 'Fill dataspace
Next
bytes = 10
I2CSEND slave,ax(),bytes
END