Action
Disable specified interrupt.
Syntax
DISABLE interrupt
Remarks
Interrupt |
INT0, INT1, SERIAL, TIMER0, TIMER1 or TIMER2. |
For other chips : INT2, INT3, INT4, INT5, INT6, INT7 , INT8, CAN
By default all interrupts are disabled.
To disable all interrupts specify INTERRUPTS.
To enable the enabling and disabling of individual interrupts use ENABLE INTERRUPTS.
Depending on the chip used, there can be more interrupts.
Look at microprocessor support for more details.
See also
Example
Enable Interrupts 'enable the setting of interrupts
Enable Timer0 'enable TIMER0
Disable Serial 'disables the serial interrupt.
Disable Interrupts 'disable all interrupts